What Is The Effect Of The Working Temperature Of The Bearing On The Operation

We mainly use the measured frequency to infer the specific situation of the bearing. The measured value will be different because of the service conditions of the bearing or sensor installation position. Therefore, it is necessary to analyze and compare the measured value of each machine in advance. At the same time, in the process of bearing operation, its temperature is also a more important parameter.
The temperature of the bearing usually begins to rise slowly with its operation, and will reach a stable state after 1 to 2 hours. The normal temperature of the bearing will vary with the heat capacity, heat dissipation, speed and load of the machine. If the lubrication and installation part are suitable, the bearing temperature will rise sharply, there will be abnormal high temperature, then it is necessary to stop running and take protective measures.
In the process of bearing working, we need to pay attention to the change of its working temperature. The use of thermal sensor can monitor the working temperature of the bearing, and realize the automatic alarm or stop when the temperature exceeds the specified value, so as to avoid the occurrence of shaft burning accidents. Generally, the high temperature is often used to indicate that the bearing has been in abnormal condition.
In order to keep the bearing running smoothly, it is very important to detect the continuity of its working temperature. Whether measuring the bearing itself or other important parts. If it is in the case of constant operating conditions, the working temperature change can indicate that a fault has occurred.