Three Common Cage Guide Methods Of Stainless Steel Bearings

1. The inner ring is usually the same as the torsion ring, and in torsion to supply the rotating body to drag the energy moment, if the stainless steel bearing load is unstable, or the load is light, it will show skid. And adhere to the adoption of internal leadership, the leading surface of the adhere to the formation of the oil film, because the friction of the oil film in the non-load area ring to the stick to drag energy to increase the stick to the additional drive energy moment of the rotating body, so as not to slip.

2. Rotating body leadership.

As usual, the scale layout of the plan is the rotating body leadership, such as stainless steel bearings adopt the rotating body leadership, adhere to the frame and internal and external guard edge are not at war, adhere to the frame can be universal, but at high speed when the rotating body speed increases, the torsion is unstable, is the rotating body leadership application for medium speed and medium load.

3. Outer circle leader.

The outer ring is usually moving, and the outer ring leads to facilitate smooth oil into the leading surface and raceway. High speed gear box for oil mist smooth, with a twist of the inner ring leader will squeeze out the oil.