The Assembly Process Requirements Of Stainless Steel Bearing Are Introduced

Bearings are a kind of mechanical parts with high precision but easy to damage. Bearings can be protected by bearing box mechanical seals or other forms of seals. The use of these sealing parts occupies a lot of volume space, and has an impact on the design of the use of products. So people gradually move the sealing device to the bearing, and constantly optimize. Nowadays, bearings with dust cover and sealing ring are very common. Bearings with sealing structure are still increasing, and a lot of materials are added. Today, Xiaobian is mainly about the assembly requirements of stainless steel bearings.
The stainless steel bearing with sealing device is mainly used in the axles and wheel axle used in railway vehicles, automobiles and other transportation vehicles. These stainless steel bearing seal device structure is diversified, for different use occasions have different characteristics.
When assembling stainless steel bearings, in addition to the requirements of fat injection, there are also strict regulations on the requirements of sealed packaging. Generally, the seal of stainless steel bearings has rubber seals with steel skeleton, and the inner and outer seals, the outer seals and the outer causes, the inner seals and the auxiliary parts of the inner group or the inner ring. And stainless steel bearings usually require long service time and free maintenance. The above requirements, in addition to the requirements of the relevant parts should be qualified, good assembly quality is also an important factor affecting the sealing device.
The sealing device of stainless steel bearing is also widely used in other different occasions, such as the stainless steel bearing of the sealing mill, which is added on both sides of the double and four columns of bearings. These sealing devices can be used separately, and can be replaced with the stainless steel bearing.